Fanuc R-2000iB/220US

Are you look­ing for a mul­ti­pur­pose robot that is able to be rail or ceil­ing mount­ed? Then you should look no fur­ther than the Fanuc R‑2000iB/​220US. This robot is extreme­ly ver­sa­tile and easy to use, with a pay­load that can han­dle heavy duty tasks and a reach to match. This is great ver­sion of the R‑2000iB if you need to save space. By mount­ing the R‑2000iB/​220 from a rail, it frees up floor space, or works well in a work cell that has lim­it­ed space. Fanuc thought of every­thing this design — even a hol­low wrist for the robot arm. This ensures that cables don’t swing dur­ing oper­a­tion or snag on exist­ing struc­tures or robots.

Anoth­er great fea­ture of the Fanuc R2000iB/​220US is its abil­i­ty to flip over, work­ing behind itself as eas­i­ly as in front. This flex­i­ble option ensures that the robot could eas­i­ly work back and forth between two sta­tions or work cells. By being able to flip over, the R 2000iB/​220US also ensures that cycle times are reduced by allow­ing sev­er­al robots to work in close prox­im­i­ty with one anoth­er with­out hav­ing to wor­ry about dam­ag­ing a robot or snag­ging on a robot.

The hol­lowed out wrist of the R‑2000iB/​220US is great for cable pro­tec­tion, but not only it cuts down on swing and allows the man­u­fac­tur­er free­dom. It is also a good choice because it cuts down on wear and tear mak­ing main­te­nance not as cost­ly over the years, and extend­ing the life of the robot. Sport­ing a stack­able, com­pact R‑30iB con­troller that is user-friend­ly and allows for max­i­mum ener­gy sav­ings, the R‑2000iB/​220US is a great all around robot for many dif­fer­ent manufacturers.